H7-RX
Wiegand Reader (EM+HID+MF)
Waterproof, conforms to IP67
Metal Case + Tamper Glass Panel
Wiegand 26~44, 56, 58 bits output
Battery life: about 12 months
Programmable Keypad Transmission: 4 bits, 8bits or virtual card number format
Card Type: 125KHz Hid & EM cards, 13.56MHz NXP Mifare, Mifare Plus, DesFire, Mifare Pro, Mifare UltraLight, Mifare Class 4K, NFC and CPU cards
Reading range: 1~4cm
External LED Control & External Buzzer Control
Sales Inquiry
Description of Wiegand Keypad and Tag Reader
H7-RX is a Wiegand output keypad, with integrated proximity reader.
It can read 125KHz EM & HID cards and 13.56MHz Mifare Cards.
Because of waterproof, it can be mounted either indoor or outdoor in harsh environments.
It can read 125KHz EM & HID cards and 13.56MHz Mifare Cards.
Because of waterproof, it can be mounted either indoor or outdoor in harsh environments.
Features of Wiegand Keypad and Tag Reader
3-IN-1 Universal Keypad ldentifies 125KHz EM+HID &13.56MHz Mifare Card
Manually programmable Wiegand format (26~44, 56,58bits)
IP67 Waterproof, Backlit keypad
Metal Case +Tamper Glass Panel
Keypad Transmission format: 4bits (8bits and 10bits virtual card number can set
FAQs of Wiegand Keypad and Tag Reader
1. What Wiegand output formats does this reader support?
This reader supports a very wide range of Wiegand output formats, including Wiegand 26 through 44 bits, as well as 56 and 58 bits. The specific format (e.g., 26-bit, 34-bit, 56-bit) should be configured to match your access control panel's input requirements. The default format is typically Wiegand 26-bit, which is the industry standard and accepted by nearly all access control systems. This broad compatibility ensures the reader can work with both legacy systems and modern controllers requiring longer bit lengths for higher security credentials.
2. How does the reader transmit keypad PIN entries?
The programmable keypad can transmit PIN entries in three different modes: 4-bit, 8-bit, or virtual card number format.
＞4-bit Transmission: Each key press is sent immediately as a 4-bit data packet.
＞8-bit Transmission: Each key press is sent as an 8-bit (ASCII) data packet.
＞Virtual Card Number Format: The entire entered PIN code (4-6 digits) is combined into a fixed-length string that mimics a card number, often using a 10-digit virtual card number format
3.Does the reader have any anti-tamper protection?
Yes. This reader features an integrated tamper protection mechanism. It is equipped with a Light Dependent Resistor (LDR) on the backlight keyboard, which acts as an anti-tamper sensor. If the glass panel is forcibly removed or the reader is disassembled from its mounting surface, the LDR detects the change in light exposure and can trigger an alarm output to the connected controller, alerting the security system of a potential tampering attempt. This makes the reader suitable for high-security installations where physical intrusion attempts must be detected.
4. What is the construction material, and is it durable for outdoor use?
The reader is constructed with a metal case (zinc-alloy enclosure) combined with a tamper-resistant glass panel. This combination provides excellent durability against physical impact and vandalism. The zinc-alloy enclosure is typically powder-coated for additional protection against corrosion.
