XK1-MF
Outdoor Metal Digital Keypad (Mifare)
Metal case, all-metal key, anti-vandal
Waterproof, conforms to IP67
One relay, 1,000 users (988 common users + 2 panic users + 10 visitor users)
PIN length: 4~6 digits
Read 13.56MHz NXP Mifare, Mifare Plus, DesFire, Mifare Pro, Mifare UltraLight, Mifare Class 4K, NFC and CPU cards (4 bytes, 7 bytes ISO14443 Type A)
Wiegand 26~44, 56, 58bits input & output
Can be used as Wiegand reader with LED & buzzer output
Pulse mode, Toggle mode
User data can be transferred
2 devices can be interlocked for 2 doors
Built-in light dependent resistor (LDR) for anti tamper
Backlit keypad, can set automatic OFF after 20 seconds




Sales Inquiry
Description of Outdoor Metal Digital Keypad (Mifare)
XK1-MF reads 13.56MHz Mifare card (4 bytes, 7 bytes), supports 1,000 users (including 2 panic users and 10 visitor users)
Its key is allmetal and the key frame is hidden, it can work standalone, or work as a controller or a standard Wiegand reader
XK1-MF reads 13.56MHz Mifare card (4 bytes, 7 bytes), supports 1,000 users (including 2 panic users and 10 visitor users)
Its key is allmetal and the key frame is hidden, it can work standalone, or work as a controller or a standard Wiegand reader
Features of Outdoor Metal Digital Keypad (Mifare)

Card Type: 13.56MHz Mifare Card (4 byte,7 byte ISO14443 Type A)
IP67 Waterproof


Wide Voltage Range:
12-28V AC/DC
Keypad Backlit and LED can be set
- Always ON
- Always OFF
- Automatically OFF after 20 seconds
- Always ON
- Always OFF
- Automatically OFF after 20 seconds

FAQs of Outdoor Metal Digital Keypad (Mifare)
1. What do"4 bytes, 7 bytes"mean, and why does it decide whether a card works?
It refers to the card's UID length on ISO14443A. Older Mifare Classic cards carry a 4-byte UID, while newer Plus, DesFire and some CPU cards use 7 bytes. XK1-MF accepts both, but the panel behind it may accept only 4-byte strings — so when a site has 7-byte cards, the Wiegand output needs 56/58-bit framing to carry the longer ID. This is the check to make before quoting.
2. Does the 20-second backlight shutoff matter beyond saving power?
It does at night. A keypad that stays lit draws attention to the door and washes out the surrounding area for cameras, while a 20-second auto-off keeps the pad visible only while someone is actually using it. The setting also keeps standby draw low on battery-backed supplies.
3. Which Mifare credentials can it actually read?
The 13.56 MHz side covers NXP Mifare Classic (1K/4K), Mifare Plus, DesFire, Mifare Pro, UltraLight, NFC and CPU cards, so both legacy Classic sites and newer encrypted-credential sites work. DesFire and Plus bring sector-level protection, which is what separates them from a plain UID read.

