SK2-EM+MF
Outdoor Keypad & Reader
Waterproof, conforms to IP67
One relay, 1000 users
Wiegand 26~44 bits input & output
User data can be transferred by Wiegand line
Access modes: Card, PIN, Card + PIN, Multi Cards/PINs
Card type: 125KHz EM+ 13.56MHz Mifare cards
PIN length: 4~6 digits
Pulse mode, toggle mode
2pcs device support interlock for two doors
Sales Inquiry
Description of Outdoor Keypad & Reader
The SK2-EM+MF is a single door multifunction standalone access controller or a wiegand output reader.
lt supports 1000 users (987 Common users+ 1 Authorized user+ 2 Pani users + 10 Vistor users) all user data can be transtered from one to antother (Max 10pcs).
Features of Outdoor Keypad & Reader
User Information Transfer
2pcs devices support interlock for two doors
Three working modes-Wiegand 26~44bits input & output
FAQs of Outdoor Keypad & Reader
1. EM and Mifare in one device — what does that mean for existing cards?
SK2-EM+MF carries both a 125 kHz EM and a 13.56 MHz Mifare reader, so old EM cards and new Mifare credentials work on the same terminal at the same time. That gives you a migration path: keep the existing EM population running while adding Mifare for new staff or higher-security zones, without swapping hardware halfway through.
2. Can two SK2 units interlock two doors?
Yes — two units can be wired in an interlock arrangement, so one door must be closed before the other can be released. That prevents tailgating through a pair of doors and is the standard setup for airlocks, clean rooms and vestibules.
3. How do pulse mode and toggle mode differ?
Pulse mode releases the relay for a set time and then re-locks, which is what you want on a normal door with an electric strike. Toggle mode flips the relay state each time a valid credential is used, so a gate can be held open for a shift or an event and closed again with the same card.
